FlocBotAutomated floc monitoring
FlocBot Simulator
Welcome to FlocBot Simulator!
🎯 Your Goal: Find your plant's optimal alum dose for maximum floc formation and water treatment quality.
1
Run a FlocBot test — press Space or click the ▶ Run Test button in the Operator Panel.
2
Review the recommendation — FlocBot analyzes floc growth and tells you whether to increase, decrease, or hold your dose.
3
Adjust your dose with the slider or ±2 ppm buttons, then run another test. Repeat until you nail the sweet spot.
4
Enter your optimal dose in the Optimal Dose box in the Operator Panel to complete the challenge!
Level 1: Standard Conditions
Spring runoff · 15–25 NTU turbidity
Found Your Optimal Dose?
ALUM
27 ppm
Dose: 27 ppm
FLOCBOT SYSTEM BOARD ALUM FEED SUCTION RETURN FLOCCULATION BASIN RAW WATER Peristaltic Pump Recirc Valve Inlet Valve ROBOJAR Drain Valve RPi RELAY DC-DC ELECTRICAL BOX ↑ → → ↓ ↓ ←
Floc Growth
Tip: Use the dose slider to set the alum dose, then click Run Test.
Space

Floc Growth Graph

Y: floc diameter (µm) · X: time (min) · scroll to zoom · drag to pan

Operator Panel

Ready
Live Floc Growth
Peristaltic PumpOFF
Inlet ValveCLOSED
Recirc ValveCLOSED
Drain ValveCLOSED
RoboJar Fill Level0%
ALUM DOSE (ppm)
27 ppm
Use the slider to adjust the alum dose. Run tests to find the optimal treatment dose.
Found Your Optimal Dose?
Enter it below to complete the challenge.